![]() |
|
|
Sonoscan D6000
SAM |
|
|
|
Used
Sonoscan Model D6000 C-Mode Scanning Acoustic Microscope
consisting of the following:
A.
Integrated Vibration-free Console Unit
1. (1)
Console - Standard Desk Style; 72" width x 30" depth x 60" height (1.8m
x 0.76 m x 1.5 m)
2. (1)
Tower - Isolated rigid scan tower and mechanism for stable, shock-free
operation
3. (1) SDX750 - High-speed
Large Area Access Scanner with active 9.22" x 12.29" scan area and Run
Mode™ software
4. (1) SDX300 - Large
sample tank stage for SDX750 and SDX760 scanners (20"x20")
B. Electronic
Hardware
1.
(1) SDX100 - Digital High Performance 100 MHz Bandwidth Pulser/Receiver
2.
(1) DAC248 - Dual Channel A-scan Waveform Display and Capture Card for
Digital Oscilloscope Data and Archiving
3. (1)
DAC246 - 512x480 High Resolution Enhanced Scanning and Data Acquisition
Package
4. (1) SDX117
- Dual (2) 17" Monitors for Extra-magnification of Acoustic Image and
Graphical Users' Interface
5. (1)
AIPD - Acoustic Impedance Polarity Detector
6. (1)
GREY - 256 linear grey scale levels with (+) and (-) polarity echoes
C.
Computer Configuration
1. (1)
PC - Host computer; Intel Pentium 266 MHz with 6 GB HDD, Removable
Superdisc 3.5" LS120 FDD; 32X CDROM drive; 64 MB DRAM; 3COM Network
card.
D. Software
and Operation Modes
1.
(1) DAC244W - Visual Acoustics™ operating software with Windows 98
operating system
2.
(1) DAC252 - Calibration Test Software and standard sample
3. (1)
DAC247 - Survey Mode™ for Quick Set-up and Minimum scan times (<10 sec)
in Pre-screening and Parts Location Modes
4. (1)
DAC228 - Advanced User Software for Single and Multiple Quantitative
B-scan Analysis Mode (Q-BAM ™) for Virtual Cross-sections
5. (1)
DAC230 - Profiler Package with 3D Top and Crack Profile Imaging
6. (1)
DAC225 - Through-transmission (THRU-Scan™) Mode Package for CSAM with
SKDL010
7. (1)
DAC220 - Modem and SONOLink™ Package of Technical Support Services
Please
submit your bids to:
[email protected]
Minimum bid
is $65,000.00.
Notes:
1.
www.semiconfareast.com
is just serving as an agent for its client and is
not the actual seller of this equipment.
2.
Transport, installation and set-up fees must be excluded from the bid,
since these will depend on the location of the bidder.
Arrangements for these shall be handled separately and paid for by the
buyer.
3. This
machine is roughly 4 years old. It was acquired by our client from
Sonoscan, Inc. in November of 1999.
Copyright
©
2004
SemiconFarEast.com.
All Rights Reserved. |